JIU TECH Enterprise Co., Ltd
JIU TECH Enterprise Co., Ltd Professional Responsible Teamwork
Add to Cart
package list :
| MB C6 adapter *1 |
| OBD cable *1 |
| usb cable *1 |
| SSD SOFTWARE *1 |
| lan cable *1 |
Our suggestion is to purchase together with Laptop, which is not only cost-effective but also convenient. Before sending it to you, our engineers will install the software for you in advance, and you can use it immediately upon receiving the package
Notice:
Please note:C4, C5 software cannot be used for this product, this product must be used with our C6 software.If you don't C6 software,please choose configuration 2
MB C6 OEM Xentry diagnosis VC*I DOIP Pass thur interfac is the latest interface for For MB & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VC*I acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
MB Xentry diagnosis VC*I DOIP Pass thur interface C6 Summary:
Mb Xentry diagnosis VC*I DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The MB Xentry diagnosis VC*I DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
If you choose hardware and software(500G hard disk)
1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
2. There is keygen in our software HDD, no need activation by us.
3. This MB Xentry diagnosis VC*I DOIP Pass thur interface C6 can't support All Key Lost,needs one key at least.
MB Xentry diagnosis VC*I DOIP Pass thur interface MB C6 Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For B-enz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
Features:
Can be used for all model series of For Mercedes For B-enz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems:
ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM's
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer est)
Assyst & ASSYST + systems
SOFTWRAE IMAGES: